Mot Stack-Current limiting
|
|
Micha0_0
|
|
Registered Member #2990
Joined: Mon Jul 12 2010, 11:22AM
Location:
Posts: 40
|
hey guys ...
today i tested the mots out of my oil filled box and i noticed that mot1 was in an short circuit(so it got very hot after a few seconds)
now i´ve wired them in series and there is now the 15cm arc i was waiting for.
this time i fed them with the 230v line and i had no ballast and it works about 5 minutes before the safety device switched the electricity off.
no the core is not a ferrite core it´s iron 4,5cm x 4,5cm it´s from an old halogen transfromer which was broken (230/12V) now the mot without secondary probably will work,but i´ll take my ring-core
|
Back to top
|
|
Moderator(s): Chris Russell, Noelle, Alex, Tesladownunder, Dave Marshall, Dave Billington, Bjørn, Steve Conner, Wolfram, Kizmo, Mads Barnkob
|
|
Powered by e107 Forum System
|