- Posted by DerStrom8 on Wednesday 25 June 2014 - 20:45:03
... 4.5" x 19" secondary and make a small (3" x 10") toroid out of 3" aluminum dryer duct. Based on JavaTC, these are the results I get:
http://oi61...
- Posted by DerStrom8 on Wednesday 25 June 2014 - 20:45:03
.... This all depends on the characteristics of your toroid material etc. Finally, I'm pretty sure most power supply toroids will not work especially if ...
- Posted by DerStrom8 on Wednesday 25 June 2014 - 20:45:03
.... This all depends on the characteristics of your toroid material etc. Finally, I'm pretty sure most power supply toroids will probably not work espec...
- Posted by DerStrom8 on Wednesday 25 June 2014 - 20:45:03
.... This all depends on the characteristics of your toroid material etc. Finally, I'm pretty sure most power supply toroids will not work especially if ...
- Posted by DerStrom8 on Wednesday 25 June 2014 - 20:45:03
...d is 3" diameter aluminum dryer duct, bent into a toroid with an OD of around 13" (actually 12.75"). That was the tightest I could bend it without dam...
- Posted by loneoceans on Sunday 15 June 2014 - 05:36:47
...en I made a small 2.8" x 5" secondary with a cute toroid I bought on ebay... and assembled quickly with acrylic cutouts and clear PVC pipes.
http...
- Posted by fungus on Saturday 14 June 2014 - 07:32:17
.../www.artlum.com/pub/tesla.3gp
For scale, the toroid is 15cm (6 inches) across. That makes the streamers 12 inches or so.
I don't know exactl...
- Posted by hsieh on Sunday 08 June 2014 - 09:09:43
...
In your first DRSSTC you seem to use iron powder toroid that will saturate at the frequencies in a Tesla coil, they are no good for GDT or CT use.
...
- Posted by hsieh on Sunday 08 June 2014 - 09:09:43
...om/3779/12220819435_a00dd2a0bc_c.jpg
The uneven toroid with lots of sharp points from the peeling aluminium foil didn't seem to impede spark perform...
- Posted by xenon109 on Sunday 01 June 2014 - 15:42:18
...from a solenoid
2 in circumference 22 in high
Toroid is huge with 24 in diameter and 4.125 in thick
Max spark output is 3-4 in at max with th...